-
Milling-turning compund lathes
-
CNC lathe with inclined rail
-
Flat-bed CNC Lathe
-
Engine lathe
-
Vertical machinging center
1、spindle:The spindle is structured with high-power,large-torque,and high-precision sleeve,characterized by increased reduction ratio and good low-speed performance.
2、Turret:The hydraulic turret is configured with the driving cutter of the hydraulic motor,crankset positioning and hydraulic clamping mechanisms of high rigidity,or a high-speed servo turret is used.
3、X/Z-axis:It is driven by a high-grade imported precision ball screw with the roller guide widened and span increased,thereby with standing heavy cutting.
4、Tailstock:Automatic programmable tailstock for easy operation and application
Item | unit | G-500/3000 | G-500/2000 | G-500/1500 | G-500/1000 | ||
Working range | Maximum spinning diameter | mm | Φ720 | ||||
Maximum turning diameter of disk parts | mm | Φ530 | |||||
Maximum machining length | mm | 3200 | 2200 | 1600 | 1100 | ||
Saddle inclination against the level | ° | 45° | |||||
Spindle | Spindle motor | kw | 22/26（continuous/30minutes） | 15/18.5（continuous/30minutes） | |||
Spindle end | A2-11 | A2-8 | |||||
Diameter of spindle through-hole | mm | Φ115 | Φ93 | ||||
Maximum rotational speed of spindle | r/min | 1500 | 3000 | ||||
Spindle precision | mm | Radial clearance≤0.008, axial clearance≤0.005 | |||||
Coordinate axis | Maximum travel along the horizontal direction(X-axis) | mm | 340 | ||||
Maximum travel along the vertical direction(Z-axis) | mm | 3200 | 2200 | 1600 | 1100 | ||
X-axis serve unit | 18Nm,3000r/min | ||||||
Z-axis serve unit | 18Nm,3000r/min | ||||||
Maximum feed rate along the X-axis | m/min | 20 | |||||
Maximum feed rate along the Z-axis | m/min | 20 | |||||
Positioning precision | mm | X±0.006,Z±0.011, | |||||
Repeated Positioning precision | mm | X±0.003,Z±0.003, | |||||
Tool post | Type of tool post | Hydraulic tool post（Servo power tool post） | |||||
Number of tools | 8-station | ||||||
Specification of outer diameter and end face tool holder | mm | 25X25 | |||||
Diameter of inner hole tool seat | mm | Φ32 | |||||
Clamping device | chuck | 12"three-jaw medium solid oil pressure chuck | 10"three-jaw medium solid oil pressure chuck | ||||
Hydraulic cylinder | Medium solid rotary cylinder | Medium solid rotary cylinder | |||||
Hydraulic tailstock | Maximum travel of the center sleeve | mm | 120 | ||||
Taper of the center sleeve | MT5 | ||||||
Hydraulic system | Oil tank capacity | L | 60 | ||||
Hydraulic pump pressure | kg | 35 | |||||
Chip removal | Auto chip conveyor | Chain plate type chip removal conveyor and chip collecting truck | |||||
Others | Total capacity of lathe power supply | kw | 34 | 27 | |||
Boundary dimension：length x width x height | mm | 6100x2200x2400 | 4900x2200x2400 | 4300x2200x2400 | 3800x2200x2400 | ||
Net weight of lathe | kg | 11000 | 8500 | 7200 | 6000 | ||
